Vehicle Recovery Kit Basics: What Should You Pack?
Article and photos by Mercedes Lilienthal
The world of overlanding or off-road adventure is exciting, but it can also be daunting for people just getting into it. Along with outfitting your rig and planning the perfect trip, assembling a vehicle recovery kit is just as importantâno matter if youâre doing 100% tarmac travel, spending time in the sand dunes, or rock crawling in the mountains. I sat down with a few industry experts to talk about recovery kit basics.
What should your basic recovery kit contain?
Andy Lilienthal*, Strategic Communications Manager for WARN Industries, has been in the off-road industry for nearly 13 years. Heâs well versed in recovery equipment, appropriate recovery techniques, and winching instruction.
Over the last several years, weâve traveled together to numerous off-road and overlanding events, hosted several yearly winching technique and recovery courses, and together own three customized 4×4 rigs.
Paul Cooper, Lead Instructor of Canadaâs Overlanding BC is also a seasoned professional when it comes to vehicular recovery. Heâs taught classes all over in the United States and Canada, and in a variety of settings. Both Andy and Paul agree that itâs key to invest in a good basic recovery kit. Your kit should have high quality items that are appropriate for the recovery points on you vehicle and have consideration for the type of terrain and environment(s) you will be traveling. Here are some basic items you should have in your kit.
âA tree trunk protector strap should be in every recovery kit. Chains and wire ropes can damage trees during vehicle recovery. A tree protector strap allows you to make use of these natural anchors without destroying them,â says Andy. âUse a tree trunk protector as a rigging strap in combination with a screw pin shackle to secure winch rope or straps to anchor points and objects.â Tree trunk straps, which are non-flexible or stretchable, should only be used via winching recoveries and not via a vehicle-to-vehicle recovery (as they do now allow for kinetic energy build-up, otherwise known as the ârubber band effectâ). Andy also says to be sure to check the tree for rot or anything else that might not make it sufficient as an anchor point. This includes being too small or rotted out. Always place the tree strap low on the treeâs trunk, too.
A recovery strap is also important to have. A recovery strap may also be known as a kinetic energy or snatch strapâmeaning the nylon webbing absorbs the shock of heavy pulls while elastic rebound energy aids in vehicle to vehicle recoveries. These types of straps “pop” a stuck vehicle out of whatever theyâre stuck in. Theyâre incredibly effective at if used correctly. âThese [straps] can save the day or can easily cause massive and serious damage to machine and people. Be sure to get some training (or at the very least online research) before you use them. Go easy and try the âleast amount of forceâ the first few attempts while recovering a stuck vehicle,â Paul mentions.
These straps should never be used for winching.
âChains can also be very useful when on the trail (they work well when winching with a Hi-Lift jack),â Paul exclaims. âThey are also great for moving unexpected obstacles off the road, like fallen trees, boulder etc. I pack a high quality 10 ft. âchoker chain.â The hoods are designed to positively engage the chain links. I would never use the chain for vehicle to vehicle recovery.â
Screw Pin Shackles:
A minimum of two to three screw pin shackles should be included. âThese shackles get their name as theyâre a bow-shaped piece of metal secured with a clevis pin or bolt across the opening, usually threaded in from one direction,â says Andy. âThey are also known as bow shackles or even D-shackles although technically they arenât D rings.â These shackles are useful as they allow for different rigging configurations to be connected or disconnected quickly. Great for connecting winch lines or recovery straps to a stuck vehicle.
âScrew pin shackles should be forged and not cast. Although cast metal is often cheaper, recovery equipment that is cast may have air pockets and bubbles within them that can compromise the productâs strength,â says Andy. Forged items are more stable, durable, and are solid. Cast items are heated above their melting temperature and poured into a mold where they solidify. Forged items are physically forced into shape while remaining in a solid state, hence alleviating air pockets and bubbles. Paul likes WARN or Crosby shackles. Another option, Paul states, is to have soft shackles on hand. Soft shackles are made from synthetic rope and are lightweight and easy to handle, but can be more prone to abrasion.
A snatch block is an integral accessory to possess if you own a winch. Andy states that snatch blocks allow you to change the angle of your winch pull or can effectively double your winchâs pulling capacity if you were to double-line to a stuck vehicle and back to yourself. This tool creates double the pulling capacity but at half the speed.
Snatch blocks are basically a pulley with a side that swings open. Because the side opens up, you donât have to thread your winch cable through the opening; instead, you open the side plate, align the cable over the pulley, and then close the side plate.
A snatch block has two primary functions in recovery winching. One is to change the direction of your winch cable when the anchor point is offset. The second is to increase the pulling power of your winch and cable.
Tire Patch Kit:
We donât travel without a good tire patch kit. No matter if youâre pounding thousands of miles of pavement or adventuring in the mountains, having a good kit (that includes replacement valve accessories, tire patch materials, a good tire gauge, etc.) can mean the difference between quickly and successfully repairing an issue or waiting hours for AAA or a tow truck if you donât have a good spare.
A good patch kit should include all the components necessary to repair tubeless radial or bias ply tires, without removing the tire from the vehicle or rim.
Winching gloves (or any kid of heavy duty gloves) are beneficial when doing recovery. Not only do they save your hands from rope burn or burrs, they allow for added grip when handling recovery accessories.
Recovery products can be both bulky and heavy. Getting a heavyweight carrying bag is key. Whether you decide upon a tote bag like a Watershed waterproof duffle bag or backpack style bag like the WARN Epic Recovery kit backpack, using a durable bag is important. âA great bag to keep all of your wares together is key, so itâs all there when you need it,â says Paul.
Having a basic medical kit is critical. We keep two kits on hand, a customized medium-sized one we compiled whose contents are kept in a generic fishing tackle box. (Chris Solis, Overland Bound Medical Ambassador, has prepared a list with his full kit here.
Adding other items to your recovery kit can also be beneficial. In my next article, weâll talk about what gear to have when adventuring in certain types of terrain: tarmac, desert and sand dunes, mountain trails, as well as rocky areas. Weâll also cover what items you should spend money on and what items could you skimp on, if necessary. Stay tuned!
*Editors Note: Andy Lilienthal is a subject matter expert and the author’s husband. No compensation was granted to any of the contributors or companies represented in product recommendations for this article; however, we may collect a share of sales or other compensation from the Amazon links on this page.
The post Vehicle Recovery Kit Basics: What Should You Pack? appeared first on Overland Bound.