The Joy of Working with a Custom Dressform

Having a dressform that duplicates the figure you’re sewing for makes the process SO much easier! Your model stands perfectly still for hours and doesn’t mind being stuck over and over with pins. She also eliminates the need for multiple in-person fittings, which was a life-saver during the worst days of COVID.

Here’s my process to create this gown which made it’s debut at the recent opening of Carnegie Hall in NYC. The design was inspired by this exquisite pleated tulle from Mendel Goldberg Fabrics.

I start by draping the fabric on the mannequin and experimenting with how it will drape and best positioning of the design. This fabric was meant to have a full skirt with one seam at center back. Additional seaming would have interrupted the flow of fabric. I also secured a full tulle underskirt to the form to get a clear vision of how much fabric was needed for the skirt.

The bodice looked best using the denser side of the lame portion at the neck and semi sheer section along the waist. I tried two versions, one using the sheer tulle for the back, a second option with the gold. I decided on the first option as the sheer back seemed more interesting; the gold back was too much gold. With the skirt basted into a grosgrain ribbon waistband, the design was complete.

Pattern work for front bodice: left photo is 1/2 of front which will be cut with fold at center front. In order to cut it with the neck gathered fuller, I drew 6 evenly spaced lines from neck to waist, left the pattern attached at the waist and spread out along the neck edge until the side seam was parallel to center front. The altered pattern was traced onto a new sheet of paper.

Left photo shows altered pattern on the tulle. Neck is at the top, waist at bottom with center fold at the right edge. Placed on the form, checked for accuracy and waistline thread traced. The back was cut from sheer portion of the tulle with pleating running vertically.

Basted everything together for a final fit check. I opted to finish the neckline with a stand collar of gathered tulle cut from the gold portion. A zipper in both underskirt and tulle allows the outer layer of tulle to hang freely; attaching it to the inner layers resulted in unattractive pulling. An inner waistband of grosgrain ribbon holds everything in place and supports the weight of the skirt.

Final try-on in the studio; fit was perfect on the first go thanks to a custom form and worn for gala night out.

The Joy of Working with a Custom Dressform